Allegro MicroSystems' MOSFET Control IC Drive Four N-channel MOSFETs in a High-side Configuration

(Product News, 19 Jun 2008)

Allegro MicroSystems Inc. has developed a four-channel high-side MOSFET control/driver IC, the A3942, designed to drive four N-channel MOSFETs in a high-side configuration with gate drive outputs that utilize a current-source topology, which eliminates the need for bootstrap capacitors.

This new device contains the necessary blocks required to provide an efficient interface between the system controller and various high current loads typically found in automotive engine control systems. Allegro's A3942 is designed to operate over the 4.5V to 60V voltage range and over the full automotive temperature range, making it an excellent choice for both 12V and 24V engine control systems.

The four outputs can be controlled with either four parallel input lines or through an integrated serial peripheral interface (SPI). The serial interface greatly increases the flexibility of the IC by allowing software control of channel specific blanking times for short-to-ground detection. The serial port is also used to output a wide range of diagnostics to the controller via a serial-data-out pin.

Multiple A3942 devices can share an SPI interface by either connecting them in parallel or in a daisy-chained series using the chip select pin to address the appropriate IC. A sleep mode is provided to reduce the quiescent current draw to less than 10µA.

Click here for more information on Allegro MicroSystems' A3942 MOSFET control/driver IC

Click here for more information on Allegro MicroSystems